Drill Rig PD 200/70 RP

Version of the Drill Rigs

The PD 200/70 RP is equipped with a powerful 470 kW diesel engine. Furthermore there is the possibility to purchase this directional drill rig with a crawler gear, a trailer as well as a steel frame.


The PD 200/70 RP-C is available with the diesel engine including hydraulic system mounted "on board" or supplied in a separate power pack (20 ft. container) similar to the trailer and frame version. With the separate power pack the customer can choose between 330 kW, 470 kW and 570 kW.


Due to the high torque and the high pull force, drillings of up to 2,400 m in length and pipe diameters of up to 1,400 mm are possible. Equipped with a rack and pinion feed system (R&P), the drill mast has a feeding length of 11 m, so that range 2 drill pipes can be used. The drilling angle of the mast of 6° - 15° can be adjusted via 6 hydraulic cylinders which are installed in the front section of the mast support.


Driven by 6 hydraulic cylinders the power rotary head has a torque of 70,000 Nm and can be shifted into two gear steps. The torque can be increased to
90,000 Nm.


Furthermore the drill rig is available with drill pipe supply system, hydraulic manipulator, drill pipe crane, camera system, a drill data log-in system as well as with further options.


On customers request the PD 200/70 RP can be equipped with an “on board” control cabin or a separate operating container, enabling the machine operator to gain optimum perspective

Pull Force:
2,000 kN
70 kNm
41 rpm
Drive Power:
470 kW
26 t

PD 200/70 RP on jobsites:

  • image
  • image
  • image
  • image
  • image
  • image